A. DIAMABRUSH™ Mastic Removal Tool
The Diamabrush™ Hardwood Prep Tool is designed to remove polyurethane and carpet adhesives from hardwood floors, effectively preparing the floor for refinishing. The diamond cutting surface remains free of melted or gummed up coating and retains its sharp cutting points throughout the life of the tool. Replacement blade kits available.

NOTE: For Single Disk CCW Only

B. SP-17 Surface Prep Tool w/Dual Position Blade Holders
The SP-17 floor surface preparation tool is an environmentally safe and productive tool for scraping concrete floors. The SP-17 was designed for scraping hard surface deposits including epoxy, fiberglass, glues, grout, ice, packed soils, paint and a variety of build-up on concrete surfaces. It is recommended to rotate cutter blades in a synchronized pattern to optimize cutter life and maximize production.

C/C1. Replacement Carbide Cutters and
Dual PositionBladeHolders
Dual position blade holders are designed with a “knockdown” position (see B left) as well as a rear slot for aggressive scraping.

WARNING! Concrete floor tools must be operated by experienced professional floor machine operators only. Operator must wear protective face shield, ear protection, footwear, and dust mask. Designed to be used on a standard 175 RPM rotary floor machine with a 1-1/2 HP motor ONLY.

DO NOT USE WITH OR NEAR FLAMMABLE MATERIALS!